You need to know how to make swallow perfume so that the swallow feels at home in its cage. Because after all, swallow birds are animals that are accustomed to living in the wild, so they need to be refracted so that these animals feel at home in a foreign place.
To make swallow perfume, you can use natural ingredients. The materials used are seaweed and swallow's nest. Here's how to make it:
Wash 100 grams of swallow nest 3 times. After that, soak for 1 night.
Take 50 grams of seaweed and soak until soft. Then mix the two ingredients and puree in a blender. After that add 5 liters of clean water.
Leave the mixture on for 1 month or until it becomes cloudy and yellowish and starts to smell fishy. Filter the liquid to separate the nest from the liquid and seaweed pulp.
The liquid that is ready can be applied to the fins. However, this mixture cannot be left on for too long, so immediately apply it to your swallow's wings. The benefits will be lost, so avoid it.
As an alternative, you can use the second method below. The materials used are bird droppings and rainwater. Here's how to make it:
Soak swallow droppings in a basin filled with rainwater for seven to 14 days.
After more than 2 weeks, the deodorizer is ready to be used and applied to the new swallow building by spraying it on the inner walls of the building. Quite simple right?
Is there really another way? Of course there is. To do this, you need to prepare several materials, which are as follows
1-5 swallow nests of the worst quality, 5 liters of clean water that has been left for 1 night, 5 eggs of ducks / chickens / ducks
Ways of making:
Soak the bird's nest in the water for about 1 hour. Then destroy the wet swallow nest until it's smooth with a blender machine.
Open chicken, duck, or eggs by removing the yolks.
Enter 5 liters of water in a bowl and then put the mashed nest with egg white in it. Stir until everything is well blended then cover tightly.
Store in a cool place, away from hot sun for four to seven days. The most fitting place is in the inn.
After the 8th day the swallow fin fragrance is ready for use. How to use it is by smearing it on the swallow's fin board using a paint brush or hand spray.
It is advisable to apply swallow fin perfume between 2 o'clock in the afternoon. and 3pm. The result is a flock of swallows around the swallow cage.
The fourth way, you need to swallow dirt and also take advantage of rainwater. The manufacturing process is not too difficult, just follow the steps below:
Soak the swallow droppings in a basin filled with rainwater for one to two weeks
After passing 2 weeks, the perfume is ready to use in the new swallow building. You do this by spraying or sprinkling it on the inner wall of the building.
For this fifth method, the ingredients needed are swallow's nest and egg white. Take advantage of rainwater too. How to make ?
Soak swallow nest first until soft for 1 day.
Mix with egg white and rainwater then in the blender
Store for 1 month until it releases gas with a sign that the bottle where the mixture is stored expands.
Ready-to-use perfume.
Unlike the previous method, for this sixth method, more material is needed. Where one of the important ingredients used is Scott Imulsion. Maybe a little confusing for you, but not for swallow breeders
For other breeders, Scott emulsion is no stranger to making swallow perfume. It is precisely this one ingredient that is the secret of the main kitchen that not many people know about.
Making this type of swallow perfume is not difficult. The materials and steps that must be taken are as follows:
Scotts Original Emulsion Bottle, 15 Grain Fish Oil, 1 Liter Water, Small Bowl or Bucket, Water Spray capacity of 1 liter or more, Blender
Ways of making :
Pour the Scoot Emulsion Fill into a small bowl or bucket.
Combine 15 fish oil plus 1 liter of water in a small bowl or bucket.
Stir well. You can use a blender to speed up the process.
When finished, put the liquid into the atomizer.
When the deodorizer is ready, apply it directly to the swallow building. You do this by spraying perfume into the swallow room with a distance of approximately 10 cm from the path. Spray also at several points within 1 - 2 m from the spraying point.
If the spraying is successful, the distinctive aroma will automatically start to smell inside. And this perfume is only disposable, so when it is made, spray it directly into the swallow building, no need to wait long. Within 1 month you can check whether there is a change in the swallow building or not. Making this type of swallow perfume is not difficult. The materials and steps that must be taken are as follows:
Scotts Original Emulsion Bottle, 15 Grain Fish Oil, 1 Liter Water, Small Bowl or Bucket, Water Spray capacity of 1 liter or more, Blender
Ways of making :
Pour the Scoot Emulsion Fill into a small bowl or bucket.
Combine 15 fish oil plus 1 liter of water in a small bowl or bucket.
Stir well. You can use a blender to speed up the process.
When finished, put the liquid into the atomizer.
When the deodorizer is ready, apply it directly to the swallow building. You do this by spraying perfume into the swallow room with a distance of approximately 10 cm from the path. Spray also at several points within 1 - 2 m from the spraying point.
If the spraying is successful, the distinctive aroma will automatically start to smell inside. And this perfume is only disposable, so when it is made, spray it directly into the swallow building, no need to wait long. Within 1 month you can check whether there is a change in the swallow building or not. Making this type of swallow perfume is not difficult. The materials and steps that must be taken are as follows:
Scotts Original Emulsion Bottle, 15 Grain Fish Oil, 1 Liter Water, Small Bowl or Bucket, Water Spray capacity of 1 liter or more, Blender
Ways of making :
Pour the Scoot Emulsion Fill into a small bowl or bucket.
